The Vision Spinner 2 is compatible with all 510 eGo clearomisers and Cartomisers.
More powerful and longer-lasting battery cell
Upgraded PCB circuitry
New power switch with battery charge indicator
Ergonomic voltage spin dial
Variable voltage output
VISION SPINNER 2
The voltage dial of the Vision Spinner ? is located at the base of the battery. There are four markings -- 3.3, 3.8, 4.3, and 4.8 volts -- but the output is adjustable throughout the entire voltage range. The spin dial is easy to turn and features a clear numbered display.
A very Powerful and upgraded 1600 mAh battery
Upgraded & more stable PCB control head
Much more comfortable and very ergonomic spin dial for adjusting your volts
Much Longer life spans for the new upgraded PCB and battery cells
Dimensions: (length)124.5 * 16.5(Diameter) mm (width):61.8g
Operating Volts (output): 3.3 to 4.8V Charging voltages(inputs): 4.2V / 420mA
Warning: setting the Vision Spinner ? at a very high voltage will drain the battery quicker. Standard eGo batteries usually work on a regulated voltage of around 3.7 volts.
Power button with battery indicator (White 60-100%, Blue 30-60%, Orange 0-30%)
Variable voltage: 3.3 volts to 4.8 volts
Cut-off time: approximately 8 seconds
Dimensions: 4-15/16" (L) x 5/8" (D)
When a short circuit is detected, the Vision Spinner ? will automatically shutdown.
To lock or unlock the Vision Spinner ? battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled.
If the power button is pressed for 10 seconds, the battery will shut down until the button is released to prevent damage to the clearomiser.
The Vision Spinner ? has a built-in battery monitor. The device will turn itself off when the battery is discharged. The LED light will flash 5 times when the battery needs recharging.
Vision Spinner Battery
- Product Code: vision spinner 2 battery
- Availability: In Stock